Fuel Filters / Centrifuge / Water Separators

Separ® Fuel Filter/Water Separators

Water and solid contaminants displace the fuel’s lubricative coating on the high precision injection components. The loss of this protection results in wear, erosion, surface pitting and eventual pressure loss. Many existing fuel filters aren’t designed to remove significant amounts of water. They are designed to do their job in a single step. The Separ 2000 offers a compact design, high efficiency, low flow restriction, a long life filter element, easy installation, and simple maintenance.

More Information on the Separ Fuel Filter/Water Separators…

Separ SWK-2000/10 D-G Fuel Filter/Water Separator

Racor® FBO-14 Fuel Filter/Searator for HighFlow Applications

FBO assemblies are specifically designed to meet the filtration requirements of today’s high pressure common-rail diesel injection systems. The unit is used for fuel dispensing pumps or as a primary fuel filter/water separator on large diesel engine applications. The FBO-14 filter assemblies are designed to meet the toughest conditions and offer ease of filter change outs. The FBO assembly can flow from 10 GPM (38 LPM) to 75 GPM (284 LPM), depending on which model, filter, and type of fuel to be filtered.

More Information on the Racor® Fuel Filter/Separator…

Racor FBO-14-DPL Filter Assembly

Goldenrod® Fuel Tank Filter

Fuel filter for use with gasoline, diesel, fuel oil, and related additives including methl, theyl and isopropyl alcohol and biodiesel up to 20 percent. Equipped standard with a 10-micron filter to remove particulates, rust, sand, dirt, and scale.

More Information on the Goldenrod® Fuel tank Filter…

TK080 Goldenrod Filter Housing

FP Series Fuel-Water Separator/Purifier

The origin of the majority of fuel related problems can be traced back to the introduction of water into a fuel system. By removing the water from fuel, the opportunity for microbial growth and other contamination is greatly reduced. AXI’s FP Series Fuel-Water Separators/Purifiers remove the free water in fuel by allowing the heavier fluid (water) fall to the bottom of the unit, while the lighter fuel is passed on into the fuel system without the need to change filter elements.

More Information on the RCM Series Water Separator/Purifier…

FP Series Fuel / Water Separator

Spin-on Filter Heads

Filter heads for spin on filters available in 1″ NPT Ports, 1″ NPT Ports (with internal bypass valve), 1 1/4″ NPT Ports (with internal bypass valve), & 1 1/2″ NPT Ports (with internal bypass valve). Utilize Water Block spin-on filters to remove emulsified water from your fuel stream.

More Information on the Spin-on Filter Heads…

Spin-On Filter Head SF 122 25 14 V22