FPS MX-F – Compact Fuel Polishing System – 260 GPH – 120V 60Hz & 230V 50 Hz
$10,830.96 – $12,811.97
FPS MX-F Smart Fuel Polishing System – 110V / 60Hz or 230V / 50Hz – an additional crate charge will be required
Description
The FPS MX-F Fuel Polishing and Tank Cleaning System has the following features:
- Flow Rate: 150 GPH / 906 LPH
- Ideal Tank Size: 3,00 to 6,000 gallons (11,400 to 22,700 ltrs)
- Power: Available in either 110 V / 60 Hz (15 Amp) or 230V / 50 Hz (15 Amp)
- Pump: 1/3 HP Spur Gear Pump
- Ports: 3/4 inch Equivalent – JIC 37 deg. Flare – Inlet & Outlet
- Primary Filtration: Separ SWK 2000/18 Fuel Filter / Water Separator
- Primary Filters: 10-Micron (Part No. 01810), 30-Micron (Part No. 01830) & 60-Micron Stainless Steel Screen (Part No. 01860S) Replacement Filters
- Secondary Filter: Spin-On Filtration
- Secondary Filters: 3-Micron Particulate (Part No. FF-3), 10-Micron Particulate (Part No. FF-10) , 25-Micron Particulate (Part No. FF-25), 3-Micron Absolute “X-Glass” Particulate (Part No. FFZ-3), 3-Micron Water Block (Part No. WB-3), and 10-Micron Water Block (Part No. WB-10)
- Suction Capability (Primed): 15 feet vertical lift or 100 feet horizontal run (lines >1 inch, primed)
- Pressure Gauge: Primary Filter to alert for filter changes
- Fuel Conditioner: LG-X 1500
- Controller: SFC-50 Automated Filtration Controller
- Alert/System Shut Down: Leak Detection, High Vacuum & High Pressure
- An Optional Automatic Water Drain System is available
- For more information, go to the FPS MX-F Compact Fuel Polishing and Tank Cleaning System page
Note – an additional crate charge will be required
The Optional Automatic Water Drain (AWD) System may be included in this system. The AWD includes PLC Control, a WATECT 550 Water Sensor, water strainer, and a 15 gallon reservoir barrel. The barrel includes an overflow protection switch to over-ride the drain process if the barrel is full. A floor stand is available to support the barrel separately and a 200 watt strap heater is available separately to wrap around the barrel to help prevent the contents from freezing.
!WARNING! This system is not meant for use with gasoline or any other flammable liquids having a flash point less than 100°F (37.8° C). Use with gasoline or any flammable liquids at a temperature exceeding their flash point presents an immediate explosion and fire hazard.
Additional information
Weight | 70 lbs |
---|---|
Dimensions | N/A |
Power Requirements | 120 Volt AC, 230 Volt AC |
Optional Auto Water Drain (AWD) System | Do Not Include AWD, Add Option: FPS MX-F OPT-AWD – Water Drain System |
You may also like…
-
- Separ Filter SWK 2000-18-130, Filter Screen
01860S Separ 60-Micron Stainless Steel Filter Element for SWK 2000/18 & 130 Fuel Filter/Water Separator (AA-1700)
- $238.38 – $2,860.56
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Separ Filter SWK 2000-18-130
01830 Separ 30-Micron Filter Element for SWK 2000/18 & 130 Fuel Filter/Water Separator (AA-1699)
- $54.14 – $649.68
- Select options This product has multiple variants. The options may be chosen on the product page
-
- Separ Filter SWK 2000-18-130
01810 Separ 10-Micron Filter Element for SWK 2000/18 & 130 Fuel Filter/Water Separator (AA-1698)
- $54.14 – $649.68
- Select options This product has multiple variants. The options may be chosen on the product page