FPS SX-F – Compact Fuel Polishing System – 150 GPH – 120V 60Hz & 230V 50 Hz

Description

The FPS SX-F Fuel Polishing and Tank Cleaning System has the following features:

• Flow Rate:  150 GPH / 568 LPH
• Ideal Tank Size: 500 to 2,000 gallons (1,900 to 7,600 ltrs)
• Power:  Available in either 120 V / 60 Hz (15 Amp) or 230V / 50 Hz (15 Amp)
• Pump: 1/3 HP Spur Gear Pump
• Ports:  3/4 inch Equivalent – JIC 37 deg. Flare Inlet – 1/2 inch Equivalent – JIC 37 deg. Flare Outlet
• Primary Filtration:  Separ SWK 2000/10KD Fuel Filter / Water Separator
• Secondary Filtration:  Spin-On Filtration
• Secondary Filtration:  3-Micron Water Block Spin-On Filter (Part No. WB-3) – 10-Micron Water Block Spin-On Filter (Part No. WB-10) – 3-Micron (Absolute) “X-Glass” Spin-On (Part No. FFZ-3) – 10-Micron Particulate Spin-On Filter (Part No. FF-10)
• Suction Capability (Primed):  15 feet vertical lift or 100 feet horizontal run (lines >1 inch, primed)
• Pressure Gauge:  Primary Filter to alert for filter changes
• Fuel Conditioner:  LG-X 500
• Controller:  SFC-50 Automated Filtration Controller
• Alert/System Shut Down:  Leak Detection, High Vacuum & High Pressure
• For more information, go to the FPS SX-F Compact Fuel Polishing and Tank Cleaning System product page

The Optional Automatic Water Drain (AWD) System may be included in this system.  The AWD includes PLC Control, a WATECT 550 Water Sensor, water strainer, and a 15 gallon reservoir barrel.  The barrel includes an overflow protection switch to over-ride the drain process if the barrel is full.  A floor stand is available to support the barrel separately and a 200 watt strap heater is available separately to wrap around the barrel to help prevent the contents from freezing.

Note: – an additional crate charge will be required