MTC 1000 – Cart Mounted Mobile Fuel Maintenance System – 900 GPH

Description

The MTC 1000 is designed for tank cleaning jobs involving contaminated fuel that require the removal of water, sediment, and sludge accumulation.  The MTC 1000 features the following capabilities:

• Flow Rate:  960 GPH / 3,600 LPH
• Ideal Tank Size: up to 10,000 gallons (up to 37,800 ltrs)
• Mobility:  Hand cart mounted components for ease of use and full mobility
• Environmental Safety:  Spill tray controls spillage during filter changes
• Power:  Available in either 115 Volt 60Hz (15 Amp) or 230V 50Hz (15 Amp) – Choose from drop-down menu
• Pump/Motor:  1/2 HP Rotary Vane Pump
• Primary Filtration:  FP-40 Purifier / Water Separator
• Secondary Filtration:  Spin-on Filter
• Secondary Filters Available:  3-Micron Particulate (Part No. FF-3), 10-Micron Particulate (Part No. FF-10) , 25-Micron Particulate (Part No. FF-25), 3-Micron Absolute “X-Glass” Particulate (Part No. FFZ-3), 3-Micron Water Block (Part No. WB-3), and 10-Micron Water Block (Part No. WB-10)
• Pressure Gauge:  Secondary Filter to alert for filter changes
• Fuel Conditioner:  LG-X 3000
• Hoses: 25 feet (7.6 m) of 1″ Clear Reinforced Suction and 25 feet (7.6 m) of 1″ Pressure (Discharge) Hose
• Connections:  1″ Cam & Groove – Inlet / Outlet
• Suction Capability (Primed:  15 ft. Vertical lift or 100 ft. horizontal run (lines > 1.5″)
• Efficient Operations:  Multi-stage design increases efficiency and minimizes the consumption of disposable filter elements
• More information on the MTC 1000-LX is available on the MTC Series Mobile Fuel Polishing & Tank Cleaning page
• Note that a crate charge will be added to the shipping charges on this system

!WARNING! This system is not meant for use with gasoline or any other flammable liquids having a flash point
less than 100°F (37.8° C). Use with gasoline or any flammable liquids at a temperature exceeding their flash point
presents an immediate explosion and fire hazard.