STS 7000 P-35 – Enclosed Programmable Automated Fuel Maintenance System – 2,100 GPH
$20,600.00 – $30,128.00
STS 7000 P-35 – Enclosed Programmable Automated Fuel Maintenance System
Description
The STS 7000 P-35 Enclosed Programmable Automated Fuel Maintenance System features the following:
- Flow Rate: 1,800 GPH / 6,814 LPH
- Ideal Tank Size: 25,000 to 50,000 gallons (75,000 to 160,000 ltrs)
- Motor: Customer supplied in-tank submersible pump up to 35 GPM
- Power: Available in either 110 Volt / 1 Ph / 60 HZ / 5 A or 230 Volt / 1 Ph / 50 Hz / 5 A: Choose Power Option
- Primary Filtration: Racor FBO-14 Fuel Filter / Water Separator
- Pressure Gauge: Primary Filter to alert for filter changes
- Secondary Filtration: Dual Spin-on Canister Filters
- Fuel Conditioner: LG-X 4000
- Controller: TSC-7000 Touch Screen Controller Featuring Remote Monitoring, Advanced Connectivity with Modbus, TCP/IP LAN and Internet Capability
- Alert/System Shut Down: Leak Detection, Filter Change Required, High Vacuum & High Pressure
- Enclosure: Weatherproof Powder-Coat Cabinet (Optional Stainless Steel Cabinet Available: Choose Option)
- Information: For additional information visit the STS 7000 Series Enclosed Programmable Automated Fuel Maintenance System page
- Optional Extended System Warranty is available – please call for additional information
The Optional Automatic Water Drain (AWD) System may be included in this system. The AWD includes PLC Control, a WATECT 550 Water Sensor, water strainer, and a 15 gallon reservoir barrel. The barrel includes an overflow protection switch to over-ride the drain process if the barrel is full. A floor stand is available to support the barrel separately and a 200 watt strap heater is available separately to wrap around the barrel to help prevent the contents from freezing.
The above picture of the STS-7000 P-35 Automated Fuel Maintenance System is depicted with the optional Automatic Water Drain System
Documentation:
STS 7000 P-35 Specification Sheet
STS 7000 P-35 Operating Manual
!WARNING! This system is not meant for use with gasoline or any other flammable liquids having a flash point less than 100°F (37.8° C). Use with gasoline or any flammable liquids at a temperature exceeding their flash point presents an immediate explosion and fire hazard.
Additional information
| Weight | N/A |
|---|---|
| Power Requirements | 120V / 1 Ph / 60 HZ / 5 A, 230 V / 1 Ph / 50 Hz / 5 A |
| Cabinet Enclosure Type | Powder Coat Steel Enclosure, Stainless Steel Enclosure |
| Option for Auto Water Drain (AWD) System | No Auto Water Drain System, Add Auto Water Drain Option |
