STS 7030 – Enclosed Programmable Automated Fuel Maintenance System – 1,800 GPH


STS 7030 – Enclosed Programmable Automated Fuel Maintenance System


The STS 7030 Enclosed Programmable Automated Fuel Maintenance System features the following:

  • Flow Rate:  1,800 GPH / 6,800 LPH
  • Ideal Tank Size: 15,000 to 45,000 gallons (56,800 to 170,300 ltrs)
  • Power is available in four variants: (1) 208 Volt -1Ph – 60 Hz (20 Amp), (2) 230 Volt – 1Ph – 60 Hz, (3) 230 Volt – 1Ph – 50 Hz (20 Amp), and (4)  480 Volt – 3 Ph, 60 Hz (20 Amp):  Choose Power Option
  • Y-Strainer:  20 Mesh
  • Primary Filtration:  Racor FBO DPL
  • Pressure Gauge:  Primary Filter to alert for filter changes
  • Secondary Filtration:  Racor FBO DPL
  • Fuel Conditioner:  LG-X 4000
  • Controller:  TSC-7000 Touch Screen Controller Featuring Remote Monitoring, Advanced Connectivity with Modbus, TCP/IP LAN and Internet Capability
  • Alert/System Shut Down:  Leak Detection, Filter Change Required, High Vacuum & High Pressure
  • Enclosure:  NEMA 4 Powder Coated Cabinet Enclosure is Standard, and a 4X Optional Stainless Steel Cabinet is Available:  Choose Enclosure Option in the product page
  • Optional Extended System Warranty is available – please call for additional information
  • Information:  For additional information visit the STS 7000 Series Enclosed Programmable Automated Fuel Maintenance System page


The Optional Automatic Water Drain (AWD) System may be included in this system.  The AWD includes PLC Control, a WATECT 550 Water Sensor, water strainer, and a 15 gallon reservoir barrel.  The barrel includes an overflow protection switch to over-ride the drain process if the barrel is full.  A floor stand is available to support the barrel separately and a 200 watt strap heater is available separately to wrap around the barrel to help prevent the contents from freezing.

The STS 7030 Series Fuel Maintenance Systems has the capability to service up to four (4) closely located fuel tanks.  An STS-OPT-2T package, containing an actuated ball valve system with a Programmable Logic Controller (PLC) must be purchased separately for all Multiple Tank Installations.  The STS-OPT-2T will control up to two tanks.  If your requirements include more than two tanks, one (1) STS-OPT-ADD-T add-on must be purchased for each tank over two, up to a total of four (4) tanks.  More than four tanks require custom engineering.  Contact us should you have any questions.


Adobe pdf STS 7030 Specification Sheet

Adobe pdf STS 7030 Operating Manual


!WARNING! This system is not meant for use with gasoline or any other flammable liquids having a flash point less than 100°F (37.8° C).  Use with gasoline or any flammable liquids at a temperature exceeding their flash point presents an immediate explosion and fire hazard.

Additional information

Weight N/A
Power Requirements

208V / 60 Hz, 240V 60Hz, 230V / 50 Hz, 480V / 60 Hz

Cabinet Enclosure Type

Powder Coat Steel Enclosure, Stainless Steel Enclosure

Optional Auto Water Drain (AWD) System

No Auto Water Drain System, Include Auto Water Drain System

You may also like…