TS-SS Fluid Samplers – Stainless Steel
$531.96 – $706.23
TS-SS Fluid Samplers – Available in 4 oz., 8 oz. & 16 oz. Capacity
Description
The TS Fluid Sampler is an Industrial Strength device designed to remove liquid samples from storage tanks. The small diameter of the TS Tank Sampler permits insertion of the Tank Sampler into a storage tank through a port as small as 1 1/2 inches.
TS-SS Tank Sampler Features
- 304 Stainless Steel throughout
- Available in three sizes:
- TS4-SS:
- 4 oz. (120 ml) sample size
- 1.375 inch (3.5 cm) outside diameter
- 10.375″ (26.3 cm) length
- 1.6 lbs (.8 kg) weight
- TS4-SS:
-
- TS8-SS:
- 8 oz. (240 ml) sample size
- 1.375 inch (3.5 cm) outside diameter
- 17.375″ (44 cm) length
- 2.5 lbs (1.1 kg) weight
- TS8-SS:
-
- TS16-SS:
- 16 oz. (480 ml) sample size
- 2.0″ (5.1 cm) outside diameter
- 14.5″ (36.8 cm) length
- 3.3 lbs (1.5 kg) weight
- TS16-SS:
- Plunger is top-vented to rapidly scavenge the fuel sample
- Tank bottom samples are taken from the bottom 1/8th inch of the tank due to the unique design of the Tank Sampler
- The mass of the 0.5 inch diameter plunger promotes a more positive seal than competing products
- Replaceable Viton “O” Ring
When the TS Fluid Sampler strikes the bottom of the tank, a plunger assembly opens to admit the sample. The plunger closes again when the sample is withdrawn, forming a tight seal. Samples can be taken at any depth with the use of a secondary trip line.
The TS Fluid Sampler is equipped with a plunger-locking cam for tight closure during transport. Available in 4 oz., 8 oz. & 16 oz. capacity.
See additional information about using the TS Series Sampling Devices for securing samples from the bottom or other intermediate level of any fuel tank at the Fuel Sampling Devices web page.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Capacity | TS4-SS – 4 oz. (AA0962), TS8-SS – 8 oz. (AA0963), TS16-SS – 16oz. (AA0964) |
