Fuel Polishing Monitoring & System Controllers
Introduction to System Controllers and Monitors
Many Fuel Polishing and Tank Cleaning Systems available for purchase on this website are equipped with a Controller that, to some extent, provides you with control over the operations of the Fuel Polishing Procedure. Generally, all systems work the same. Each system has a pump to circulate the fuel, drawing the fuel from the tank, feeds the fuel through one or more filters, passes the fuel through the Fuel Conditioner, and then returns the fuel to the tank.
At the basic level, the Controller is Programmable allowing for periodic scheduled treatments of the fuel to occur without requiring a person to initiate the Fuel Polishing. Safeguards are built into the Controller to automatically shut down should something happen that is not good, such as a leak develops or a filter requires changing. Alerts of some form (alarms sound and/or lights flash) are provided to an operator who may then investigate and do what is necessary for the process of Polishing the Fuel to continue. Some Controllers have advanced control features to perform tasks on their own when necessary, such as drawing water from the primary filter and depositing it into a container, without the need for operator intervention.
Advanced Automation Controllers can handle up to four tanks and communicate alerts via text messaging, use a Touch Screen for ease of programming and can be integrated in building control centers.
Each Fuel Polishing and Tank Cleaning System that is included in the FPS Compact Series or the STS 6000 or 7000 Series, and all MTC HC Series Mobile Systems include a Controller that adds greatly to the value and ease-of-use of our Fuel Polishing Systems.
System Prices quote for Systems include the price of the Standard Model Controller appropriate for that system. However, incorporating optional functionality, such as the Automatic Water Drain System, Multiple Tank capability, Vacuum/Pressure Transducers, Flow Transmitter, Multi-Point Flow Path and other optional equipment may require an upgrade in Controller to provide optimal utility.
Please click on the below link to jump to that section of this page:
Programmable Digital System Monitor — Designed for FPS Compact Fuel Polishing Systems that are powered by 12 Volt or 24 Volt DC power.
SFC-50 Fuel Polishing Controller — Our base and most economical Controller with LCD/Buttons User Interface, external integration, programmable scheduling and automatic shut down and alerts for exceptions. This Controller is typically used for the Mobil Tank Cleaning MTC HC-50 System and the STS 6000 SX-F System.
SFC 70 Fuel Polishing Controller — A step up from our base model with LCD/Buttons User Interface with Multi-Tank (up to 2 tanks) capabilities and Auto Water Drain controls (AWD).
TSC-70 Fuel Polishing Controller — A move up from the SFC-70 Controller to Touchscreen User Interface, Multi-Tank (up to 4 tanks), AWD, and other optional functionality.
SFC-80 Fuel Polishing Controller — A more robust controller with LCD/Buttons User Interface for larger volume Fuel Polishing and heavier power requirements with optional functionality.
TSC-80 Fuel Polishing Controller — A step up from the SFC-80 Controller with Touchscreen User Interface for larger volume Fuel Polishing and heavier power requirement with optional functionality.
Note: These Fuel Polishing Controller and System Monitors are not available for purchase. This page is included for information purposes and to aid in your determining the best Fuel Polishing and Tank Cleaning System that best suits your operational requirements. These Controllers and Monitors are available as replacement components. Please contact us with any questions or for additional information.
SFC-50
Fuel Polishing Controller
SFC-50
Fuel Polishing System
The SFC-50 Filtration Controller is a Fully Automated Intelligent Filtration Controller that provides for user programmed periodically scheduled fuel maintenance operations utilizing an LCD Interface with digital text readout. Operations are continuously monitored during operation and alerts are automatically generated when a component requires user intervention.
These Automated Filtration Controllers assure fuel remains in optimal condition and is ready to use at all times. The SFC-50 takes the work out of performing the critical periodic Filtration, Fuel Treatment and Tank Cleaning operations without outside intervention and provides continuous monitoring during treatment performance for the Fuel Maintenance and Tank Cleaning System.
SFC-50 Fuel Polishing Controller Features
- Incorporated PLC-Based Timer
- Memory retention during power outages
- Alarm Indicator Light(s) (red)
- Pump Operation Light (orange)
- Control Circuit Breakers (CB-1, CB-2)
- Pump Control Selector Switch {Hand (Manual) / Off / Auto}
- System Power Indicator Light(s) (green)
- Alarm Reset Push Button (blue)
- PLC Navigational Control Buttons
- LCD Screen
SFC-50 Controller Specifications
- Rated Dimensions: 10″ x 8″ x 4″ (25.4 cm x 20.3 cm x 10.2 cm) H x W X D
- Construction: Polycarbonate UL-508A, NEMA 4X
- PLC Hardware: Siemens LOGO! PLC, 24VDC System
- Communication: Modbus TCP/IP, and Summary Alarm (Dry-Contact)
- Rated Power: 120V/60Hz/1Ph, or 230V/50Hz/1Ph
- Operating Temperature: -4 deg. F (-20 deg. C) to 131 deg F (55 deg. C)
- Operating Weight: 25 lbs (11.4 kg) Standard Controller
- Standard Vacuum / Pressure Switches
- User Interface: LCD/Buttons
- Pump Control Switch (Auto–Off–Manual), weatherproof
- Alarm Reset — Weather proof push button Power Available indicator
- Leak sensor and alarm indicator (system shutdown)
- Mechanical water separator high water alarm indicator and system shutdown (water sensors)
- Pump running indicator
- Primary filter high vacuum alarm indicator and system shutdown (vacuum sensors)
- Primary Filter / Water Separator high vacuum alarm indicating filter element change and system shutdown (vacuum sensor)
- Primary filter / Water separator high water alarm indicator and system shutdown (water sensor)
- Secondary filter high pressure alarm indicator and system shutdown (pressure sensors)
- Pump motor starter with single-pole circuit breaker and contractor
- Water Detection in Bowl of Primary Filtration
- Vacuum & Pressure Switches (Filter Replacement)
- Leak Detection Float Switch
- Pump Overload
The SFC-50 gives an instant visual status report of System Power (green), Pump Running (orange), and Alarms (red) for high vacuum, high pressure, leak detection and high water levels. The select switch provides the option of manual operation or running the fully automated program.
When used with the MTC HC-50 Pallet Mounted Fuel Polishing System, the controller is equipped with a remote pendant power control thatk manually initiates a shutdown alert which will inhibit active pump operations until the condition is removed.
The STS 6000 SF-X system is standard with an alarm strobe light that alerts to a system alarm for high visibility.
SFC-70
Automated Fuel Polishing Controller
SFC-70 Fuel
Polishing System Controller
The SFC-70 is a Fully Automated Intelligent Filtration Controller that provides for user programmed periodically scheduled fuel maintenance operations utilizing an LCD Interface with digital text readout. Operations are continuously monitored during operation and alerts are automatically generated when a component requires user intervention.
These Automated Filtration Controllers assure fuel remains in optimal condition and is ready for use at all times. The SFC-70 Controller assures reliable performance of your Fuel Polishing System during the critical periodic Filtration, Fuel Treatment and Tank Cleaning operation without outside intervention by monitoring the performance of the Fuel Maintenance and Tank Cleaning System.
SFC-70 Fuel Polishing Controller Features
- Programmable
- Fully Automated
- Digital Text Readout
- BMS/BAS Interface
- Easy Access Alarm Reset
Advanced Functionality of the SFC-70 System
- Automated Water Drain (AWD) from Primary Filtration Vessel (optional)
- Multiple Tank Operation (up to two tanks) (optional)
- Vacuum/Pressure Transducers (optional)
- Flow Switch
- Flow Transmitter (optional)
- Additional Power Options for Select Systems
SFC-70 Controller Specifications
- Rated Dimensions: 14″ x 12″ x 6″ (35.6 cm x 30.5 cm x 15.2 cm) H x W X D
- Construction: Polycarbonate UL-508A, NEMA 4X
- PLC Hardware: Siemens LOGO! PLC, 24VDC System
- Communication: Modbus TCP/IP, and Summary Alarm (Dry-Contact)
- Rated Power: 120V/60Hz/1Ph, 208-230V/60Hz/1Ph, 230V/50Hz/1Ph
- Operating Temperature: -4 deg. F (-20 deg C) to 131 deg F (55 deg C)
- Operating Weight: 25 lbs (11.4 kg) Standard Controller
- Available Upgrades: Vacuum/Pressure Transducers, Multi-Tank (2-Tanks Max.), Auto Water Drain (AWD)
- External remote shut-down feature (MTC HC-50 only)
- User Interface: LCD/Buttons
- Pump Control Switch (Auto–Off–Manual), weatherproof
- Alarm Reset — Weather proof push button (blue)
- Power Available indicator (green)
- Leak sensor and alarm indicator (system shutdown) (red)
- Mechanical water separator high water alarm indicator and system shutdown (water sensors) (red)
- Pump running indicator (orange)
- Primary filter high vacuum alarm indicator and system shutdown (vacuum sensors)(red)
- Primary Filter / Water Separator high vacuum alarm indicating filter element change and system shutdown (vacuum sensor)(red)
- Primary filter / Water separator high water alarm indicator and system shutdown (water sensor) (red)
- Secondary filter high pressure alarm indicator and system shutdown (pressure sensors) (red)
- Pump motor starter with single-pole circuit breaker and contractor
The SFC-70 includes External Connectivity for Modbus TCP/IP & Summary Dry Contacts with Ethernet connectivity utilizing standard RJ-45 style connection.
The three color-coded lights give an instant visual status report of system power (green), pump running (orange), and alarm (red). The alarm reset is the easily accessible large (blue) push button. The selector switch provides the option of manual operation or running the fully automated program.
The controller may also be used with an optional remote pendant power control switch and an optional alarm strobe light for high visibility.
SFC-70 Remote Interface
SFC-70 Remote Interface
A Remote Interface is typically provided on Systems that use an enclosed cabinet, with this interface installed on the cabinet door. Status indicators include System Power (Green), Pump Running (Orange) and Alarm Reset (Blue).
Summary alarm indicators allow for quicker identification of specific alarm conditions, including High Vacuum (red), High Pressure (red), Low Flow (red), Basin Leak red), and High Water (red) along with a built-in Emergency Stop mushroom push button that will break the pump run signal directly. A Hand/OFF/Auto keyed switch is included on the Remote Interface to prevent unauthorized tampering with the System’s current operational mode.
The SFC-70 Controller is standard on the following Fuel Polishing Systems:
- FPS SX-F Compact – 2 GPM
- FPS MX-F Compact – 4 GPM
- FPS LX-F Compact – 10 GPM
- STS 6003 – 3 GPM
- STS 6004 – 4 GPM
- STS 6010 – 10 GPM
- STS 6020 – 20 GPM
- MTC HC-90 – 90 GPM
Controller up-grades are available that provide for additional functionality.
TSC-70 Touch Screen
Advanced Automation Filtration Controller
TSC-70
Touch-Screen Controller
The TSC-70 is a Fully Automated Intelligent Filtration Controller that provides for user programmed periodically scheduled fuel maintenance operations utilizing a Touch-Screen Interface. Operations of the TSC-70 are very similar to the SFC-70 Controller with the addition of the Touch Screen interface that greatly eases programming and general operations.
These Automated Filtration Controllers assure fuel remains in optimal condition and is ready for use at all times. The TSC-70 Controller assures reliable performance of your Fuel Polishing System during the critical periodic Filtration, Fuel Treatment and Tank Cleaning operation without outside intervention by monitoring the performance of the Fuel Maintenance and Tank Cleaning System.
TSC-70 Fuel Polishing Controller Features
- Programmable
- Fully Automated
- Digital Text Readout
- BMS/BAS Interface
- Easy Access Alarm Reset
Advanced Functionality of the TSC-70
- Automated Water Drain (AWD) from Primary Filtration Vessel (optional)
- Multiple Tank Operations (up to four tanks) (optional)
- Vacuum/Pressure Transducers (optional)
- Flow Switch
- Flow Transmitter (optional)
- Remote Drop-in (optional)
- Multi-Point Flow Path (2-8 pairs) (optional)
- Additional Power Options for select Systems
TSC-70 Controller Specifications
- Rated Dimensions: 14″ x 12″ x 6″ (35.6 cm x 30.5 cm x 15.2 cm) H x W X D
- Construction: Polycarbonate UL-508A, NEMA 4X
- PLC Hardware: Unitronics 7″ Touchscreen HMI, 24VDC System
- Communication: Remote Access (VNC), Modbus TCP/IP, Modbus RTU (requires additional options),Email, Bacnet (requires additional options), and Summary Alarm (Dry-Contact)
- Rated Power: 120V/60Hz/1Ph, 208-230V/60Hz/1Ph, & 230V/50Hz/1Ph
- Operating Temperature: 14 deg. F (-10 deg C) to 122 deg F (50 deg C)
- Operating Weight: 25 lbs (11.4 kg) Standard Controller
- Available Upgrades: Pressure Transmitters, Multi-Tank (4 Tanks Max.), Multi-Point (8 Pair Max), Auto Water Drain (AWD), Flow Control, and Fuel Heating
- External remote shut-down feature
- User Interface: LCD/Touchscreen
- Pump Control Switch (Auto–Off–Manual), weatherproof
- Alarm Reset — Weather proof push button Power Available indicator
- Leak sensor and alarm indicator (system shutdown)
- Mechanical water separator high water alarm indicator and system shutdown (water sensors)
- Pump running indicator
- Primary filter high vacuum alarm indicator and system shutdown (vacuum sensors)
- Primary Filter / Water Separator high vacuum alarm indicating filter element change and system shutdown (vacuum sensor)
- Primary filter / Water separator high water alarm indicator and system shutdown (water sensor)
- Secondary filter high pressure alarm indicator and system shutdown (pressure sensors)
- Pump motor starter with single-pole circuit breaker and contractor
The TSC-70 can include External Connectivity for Modbus TCP/IP & Summary Dry Contacts with Ethernet connectivity utilizing standard RJ-45 style connection.
The three color-coded lights give an instant visual status report of system power (green), pump running (orange), and alarm (red). The alarm reset is the easily accessible large (blue) push button. The selector switch provides the option of manual operation or running the fully automated program.
The controller may also be used with an optional remote pendant power control switch and an optional alarm strobe light for high visibility.
TSC-70 Remote Interface
TSC-70
Remote Interface
A Remote Interface is typically provided on Systems that use an enclosed cabinet, with this interface installed on the cabinet door. Status indicators include System Power (Green), Pump Running (Orange) and Alarm Reset (Blue).
Summary alarm indicators allow for quicker identification of specific alarm conditions, including High Vacuum (red), High Pressure (red), Low Flow (red), Basin Leak red), and High Water (red) along with a built-in Emergency Stop mushroom push button that will break the pump run signal directly. A Hand/OFF/Auto keyed switch is included on the Remote Interface to prevent unauthorized tampering with the System’s current operational mode.
The TSC-70 Controller available as an upgrade on the following Fuel Polishing Systems:
- FPS SX-F Compact – 2 GPM – 120V/60Hz/1Ph or 230V/50Hz/1Ph
- FPS MX-F Compact – 4 GPM – 120V/60Hz/1Ph or 230V/50Hz/1Ph
- FPS LX-F Compact – 10 GPM – 120V/60Hz/1Ph or 230V/50Hz/1Ph
- STS 7003 – 3 GPM – 120V/60Hz/1Ph, or 230V/50Hz/1Ph
- STS 7004 – 4 GPM – 120V/60Hz/1Ph, or 230V/50Hz/1Ph
- STS 7010 – 10 GPM – 120V/60Hz/1Ph, or 230V/50Hz/1Ph
- STS 7020 – 20 GPM – 120V/60Hz/1Ph, or 230V/50Hz/1Ph
- STS 7030 – 30 GPM – 230V/50Hz/1Ph, 208-230V/60Hz/1Ph, 240V/60Hz/3Ph, or 480V/60Hz/3Ph
- STS 7000 P35 – 120V/60Hz/1Ph, 230V/50Hz/1Ph, or 208-230V/60Hz/1Ph
- MTC HC-50 – 50 GPM – 120V/60Hz/1Ph, 230V/50Hz/1Ph, or 208-230V/60Hz/1Ph
- MTC HC-90 – 90 GPM – 230V/50Hz/1Ph, or 208-230V/60Hz/1Ph
Further Controller up-grades are available for the FPS SX-F, FPS MX-F, FPS LX-F, and MTC HC-90 that provide for additional functionality.
SFC-80
Automated Fuel Polishing Controller
SFC-80
Automated Fuel Polishing Controller
The SFC-80 is a Fully Automated Intelligent Filtration Controller that provides for user programmed periodically scheduled fuel maintenance operations utilizing an LCD Interface with digital text readout. Operations are continuously monitored during operation and alerts are automatically generated when a component requires user intervention
These Automated Filtration Controllers assure fuel remains in optimal condition and is ready for use at all times. The SFC-80 Controller assures reliable performance of your Fuel Polishing System during the critical periodic Filtration, Fuel Treatment and Tank Cleaning operation without outside intervention by monitoring the performance of the Fuel Maintenance and Tank Cleaning System.
SFC-80 Fuel Polishing Controller Features
- Programmable
- Fully Automated
- Digital Text Readout
- BMS/BAS Interface
- Easy Access Alarm Reset
- Automated Water Drain (AWD) from Primary Filtration Vessel (optional)
- Multiple Tank Operation (up to two tanks) (optional)
- Vacuum/Pressure Transducers (optional)
- Flow Switch
- Flow Transmitter (optional)
Advanced Functionality Available with the SFC-80 Controller Not Available with the SFC-70 Controller
- Heavier Duty Power Options available for the SFC-80 (not available with the SFC-70) include the 240V/60Hz/3Ph, and 480V/60Hz/3Ph
- Capable of operating the heavier load requirements of the STS 6030, STS 6040, STS 6000 P-35, MTC HC-150, and MTC HC-300 Fuel Maintenance Systems
Advanced Functionality of the SFC-80 Controller
- Automated Water Drain (AWD) from Primary Filtration Vessel (optional)
- Multiple Tank Operation (up to two tanks) (optional)
- Vacuum/Pressure Transducers (optional)
- Flow Switch
- Flow Transmitter (optional)
- Additional Power Options for Select Systems
SFC-80 Controller Specifications
- Rated Dimensions: 16″ x 14″ x 8″ (40.6 cm x 35.6 cm x 20.3 cm) H x W X D
- Construction: Polycarbonate UL-508A, NEMA 4X
- PLC Hardware: PLC Hardware: Siemens LOGO! PLC, 24VDC System
- Communication: Modbus TCP/IP, and Summary Alarm (Dry-Contact)
- Rated Power: 120V/60Hz/1Ph, 208-230V/60Hz/1Ph, 230V/50Hz/1Ph
- Operating Temperature: -4 deg. F (-20 deg C) to 131 deg F (55 deg C)
- Operating Weight: 25 lbs (11.4 kg) Standard Controller
- Available Upgrades: Vacuum/Pressure Transducers, Multi-Tank (2 Tanks Max.), Auto Water Drain (AWD), Flow Transmitter
- External remote shut-down feature
- User Interface: LCD/Touchscreen
- Pump Control Switch (Auto–Off–Manual), weatherproof
- Alarm Reset — Weather proof push button Power Available indicator
- Leak sensor and alarm indicator (system shutdown)
- Mechanical water separator high water alarm indicator and system shutdown (water sensors)
- Pump running indicator
- Primary filter high vacuum alarm indicator and system shutdown (vacuum sensors)
- Primary Filter / Water Separator high vacuum alarm indicating filter element change and system shutdown (vacuum sensor)
- Primary filter / Water separator high water alarm indicator and system shutdown (water sensor)
- Secondary filter high pressure alarm indicator and system shutdown (pressure sensors)
- Pump motor starter with single-pole circuit breaker and contractor
- The TSC-80 can include External Connectivity for Modbus TCP/IP & Summary Dry Contacts with Ethernet connectivity utilizing standard RJ-45 style connection.
- The three color-coded lights give an instant visual status report of system power (green), pump running (orange), and alarm (red). The alarm reset is the easily accessible large (blue) push button. The selector switch provides the option of manual operation or running the fully automated program.
- The controller may also be used with an optional remote pendant power control switch and an optional alarm strobe light for high visibility.
SFC-80 Remote Interface
TSC-80 Remote Interface
A Remote Interface is typically provided on Systems that use an enclosed cabinet, with this interface installed on the cabinet door. Status indicators include System Power (Green), Pump Running (Orange) and Alarm Reset (Blue).
Summary alarm indicators allow for quicker identification of specific alarm conditions, including High Vacuum (red), High Pressure (red), Low Flow (red), Basin Leak red), and High Water (red) along with a built-in Emergency Stop mushroom push button that will break the pump run signal directly. A Hand/OFF/Auto keyed switch is included on the Remote Interface to prevent unauthorized tampering with the System’s current operational mode.
The SFC-80 Controller available as an upgrade on the following Fuel Polishing Systems:
- FPS SX-F Compact – 2 GPM – 208-230V/60Hz/1Ph, 240V/60Hz/3Ph, 480V/60Hz/3Ph
- FPS MX-F Compact – 4 GPM – 208-230V/60Hz/1Ph, 240V/60Hz/3Ph, 480V/60Hz/3Ph
- FPS LX-F Compact – 10 GPM – 208-230V/60Hz/1Ph, 240V/60Hz/3Ph, 480V/60Hz/3Ph
- MTC HC-90 – 90 GPM – 208-230V/60Hz/1Ph, 240V/60Hz/3Ph, 480V/60Hz/3Ph
Further Controller up-grades are available for the FPS SX-F, FPS MX-F, FPS LX-F, STS 6003 & 7003, STS 6004 & 7004, STS 6040 & 7040, MTC HC-90, MTC HC-150, and MTC HC-300 to the TSC-80 Controller (see the following section) that provide for additional functionality.
TSC-80
Automated Fuel Polishing Controller
TSC-80
Automated Fuel Polishing Controller
The TSC-80 is a fully automated Intelligent Filtration Controller that provides for user programmed periodically scheduled fuel maintenance operations utilizing a Touch-Screen Interface. Operations of the TSC-80 are very similar to the SFC-80 Controller with the additional of the Touch-Screen interface that greatly eases programming and general operations.
These Automated Filtration Controllers assure fuel remains in optimal condition and is ready for use at all times. The TSC-80 Controller assures reliable performance for your Fuel Polishing System during the critical periodic Filtration, Fuel Treatment and Tank Cleaning operation without outside intervention by monitoring the performance of the Fuel Maintenance and Tank Cleaning System.
TSC-80 Fuel Polishing Controller Features
- Programmable
- Fully Automated
- Digital Text Readout
- BMS/BAS Interface
- Easy Access Alarm Reset
- Automated Water Drain (AWD) from Primary Filtration Vessel (optional)
- Multiple Tank Operations (up to two tanks) (optional)
- Vacuum/Pressure Transducers (optional)
- Flow Switch
- Flow Transmitter (optional)
- Remote Drop-in (optional)
- Multi-Point Flow Path (2-8 pairs) (optional)
- Additional Power Options for select Systems
Advanced Functionality Available with the TSC-80 that is Not Available with the TSC-70 System
- Heavier Duty Power Options available for the SFC-80 (not available with the SFC-70) include the 240V/60Hz/3Ph, and 480V/60Hz/3Ph
- Capable of operating the heavier load requirements of the STS 7030, STS 7040, MTC HC-150, and MTC HC-300 Fuel Maintenance Systems
TSC-80 Controller Specifications
- Rated Dimensions: 16″ x 14″ x 8″ (40.6 cm x 35.6 cm x 20.3 cm) H x W X D
- Construction: Polycarbonate UL-508A, NEMA 4X
- PLC Hardware: Unitronics 7″ Touchscreen HMI, 24VDC System
- Communication: Remote Access (VNC), Modbus TCP/IP, Modbus RTU (requires additional options),Email, Bacnet (requires additional options), and Summary Alarm (Dry-Contact)
- Rated Power: 208-230V/60Hz/1Ph, 240V/60Hz/3Ph, or 480V/60Hz/3Ph
- Operating Temperature: 14 deg. F (-10 deg C) to 122 deg F (50 deg C)
- Operating Weight: 30 lbs (13.6 kg) Standard Controller
- Available Upgrades: Pressure Transmitters, Multi-Tank (4 Tanks Max.), Multi-Point (8 Pair Max), Auto Water Drain (AWD), Flow Control, and Fuel Heating
- External remote shut-down feature
- User Interface: LCD/Touchscreen
- Pump Control Switch (Auto–Off–Manual), weatherproof
- Alarm Reset — Weather proof push button Power Available indicator
- Leak sensor and alarm indicator (system shutdown)
- Mechanical water separator high water alarm indicator and system shutdown (water sensors)
- Pump running indicator
- Primary filter high vacuum alarm indicator and system shutdown (vacuum sensors)
- Primary Filter / Water Separator high vacuum alarm indicating filter element change and system shutdown (vacuum sensor)
- Primary filter / Water separator high water alarm indicator and system shutdown (water sensor)
- Secondary filter high pressure alarm indicator and system shutdown (pressure sensors)
- Pump motor starter with single-pole circuit breaker and contractor
The SFC-50 can include External Connectivity for Modbus TCP/IP & Summary Dry Contacts with Ethernet connectivity utilizing standard RJ-45 style connection. The three color-coded lights give an instant visual status report of system power (green), pump running (orange), and alarm (red). The alarm reset is the easily accessible large (blue) push button. The selector switch provides the option of manual operation or running the fully automated program. The controller may also be used with an optional remote pendant power control switch and an optional alarm strobe light for high visibility.
TSC-80 Remote Interface
TSC-80 Remote Interface
A Remote Interface is typically provided on Systems that use an enclosed cabinet, with this interface installed on the cabinet door. Status indicators include System Power (Green), Pump Running (Orange) and Alarm Reset (Blue).
Summary alarm indicators allow for quicker identification of specific alarm conditions, including High Vacuum (red), High Pressure (red), Low Flow (red), Basin Leak red), and High Water (red) along with a built-in Emergency Stop mushroom push button that will break the pump run signal directly. A Hand/OFF/Auto keyed switch is included on the Remote Interface to prevent unauthorized tampering with the System’s current operational mode.
The TSC-80 Controller is standard on the following Fuel Polishing Systems:
- STS 7030 – 30 GPM
- STS 7040 – 40 GPM
- MTC HC-90 – 90 GPM
- MTC HC-150 – 150 GPM
- MTC HC-300 – 300 GPM
Controller up-grades are available that provide for additional functionality.
Programmable Digital
System Monitor
Programmable Digital
System Monitor
The Programmable Digital Timer and System Monitor provides control of the following FPS Compact Systems, all of which are available with 12 Volt DC or 24 Volt DC power:
- FPS-DX-S – Compact Fuel Polishing System – 80 GPH
- FPS-Compact – Compact Fuel Polishing System – 80 GPH
- FPS-FX – Compact Fuel Polishing System – 150 GPH
This Programmable Digital Timer has an LCD screen which provides time readout. The system provides any of 15 combinations of days, start time and desired stop time and can be repeated up to eight cycles per month.
The Programmable Digital Timer features the following:
- Control panel in electrical sub-enclosure
- Breaker (Power On/Off switch)
- Power: 12 volt DC / 10 Amp or 24 volt DC / 5 Amp
- Battery backup to retain program memory during power outages
- System power indicator
- Alarm indicator light(s)
- High vacuum alarm indicator and system shutdown (vacuum sensor)
- Water Sensor Alarm
- Leak Detector (float switch)
- Alarm Reset – push button
The FPS System Monitor gives you the flexibility to have a system that runs for a fixed time period and then automatically shuts off.
The FPS System Monitor utilizes the sensors located on the bowl of the Separ Fuel Filter / Water Separator to determine when water that has been captured in the bowl has reached a volume to complete the electric circuit across the sensors. When detection is positive, the system shuts down the operation of the Monitor and provides an audible alarm indicating the water in the filter bowl requires removal.
The FPS System Monitor also will automatically shut down and provide an audible alarm when high vacuum or high pressure is sensed in the system, possibly indicating a clogged primary filter or that a secondary filter element requires attention and is in need of changing. The FPS System Monitor also has a sensor that would automatically shut off the pump and provide an audible alarm if fuel or other fluid accumulates in the spill tray, the bottom portion of the mounting structure, activating the float switch.
The FPS System Monitor is a 12 Volt (24 Volt is available as an option) unit that can be operated with battery power or with the optional power converter, powered by 110V 60Hz or 230V 50Hz power.
Replacement FPS System Monitors are available, but not sold separately. Contact us for information.
Advertisement
